#1 Rated 24X7 Plumbing Companies Anchorage 99503 AK (844-507-4350)

Posted by in Plumbing Companies, on February 15, 2018

Plumbing Emergency Firms in Anchorage Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Anchorage 99503 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Anchorage 99503 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Anchorage 99503 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Anchorage 99503 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Anchorage Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Anchorage 99503 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Anchorage 99503 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Anchorage 99503 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Anchorage 99503 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Bethel 99559 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Chefornak 99561 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Anvik 99558 AK (844-507-4350)

If you heat with electricity and live in a warm and sunny climate, consider installing a solar water heater.

Tips for installing and repairing a gas line: Always test the pipe before using it- Whenever you carry out a repair or replacement work on your gas lines, you should check the pipe for leaks before starting regular use of the gas line. For this purpose, you need to switch on the gas burner for some time and see whether gas is leaking or not. If there is a leak, you can get a distinct smell and hear a hissing sound coming from the pipe line. You need to turn off the gas immediately and seal the leaks. You should repeat this checking process till you are completely satisfied that there are no leaks.

Shop around for tile. You can find nice floor and wall tile for $1 to $2 per square foot. Use that less expensive tile for most of the work, and then incorporate luxury tile as accents.

Tips for repairing burst pipes: Drain the excess water- After shutting-off the main water supply, you need to make sure that there is no water left in the broken pipe. For this purpose, you need to open all the faucets and flush the toilets. The excess water drains away, leaving the pipe dry and eliminating the possibility of the leaking of water. Once the plumbing system of your house is drained, you can ask a plumber to repair the burst pipe. This makes the process of repairing efficient and quick.

A large horsepower sump pump, in a small diameter basin will cause the pump to cycle more frequently, shortening your pumps life.

Many toilets really do run only at night; that’s because people use much less water during these hours and in many municipal water systems, the water pressure rises considerably during this time.

Check the hoses: Locate the hoses that feed and drain the water from your machine. If you find water where they are connected, check the clamps to make sure they are tight. If the clamps are secure, check the outlet pipe to make sure there aren’t any kinks are preventing the water from flowing. If you find any leaks in the hose, you’ll have to replace them.

Make sure that everyone within your household knows how to turn off the principle water supply, or understands how to contact someone that can. In the case of a burst pipe or another water-related emergency, you ought to immediately shut down this type of water to prevent flooding, structural damage, as well as a sky-high water bill.

Eliminate drafts in crawl spaces to prevent frozen pipes.

What to look for in your next contractor – Do they guarantee their work? It is an industry standard to verify labor and parts. Be wary of any plumber that does not offer any type of guarantee.

If the issue isn’t #11 than check to see if you have a water-filled float ball. If this is the case than it is time to replace the ball.

High-efficiency toilets are available in a wide range of models

Toilets and sinks require different types of plungers to remove clogs. Make sure you’re using the correct one.

Repair broken and cracked windows and doors to prevent frozen pipes.

Don’t pour oils, grease or fat down the sink. When they cool, they may harden and make clogs within your drains. This is especially true for those who have a garbage disposal, as the fat may cause the blades to perform slower and less efficiently. Keep a container in your kitchen that is utilized specially for discarded grease.

Dish Detergent: If your toilet is clogged, pour 1/4 cup of dish detergent in the bowl. Then boil some water. The dish soap will act as a lubricant and help break up any greasy residue. Then pour the hot water down, and get ready to start plunging. If the plunger doesn’t cut it, rubber gloves may be the next option.

Tips for installing and repairing a gas line: Do not attach the gas line tightly- This is a small detail which needs to be kept in mind while attaching a pipe line. It is better to keep the attachment a little loose because tightening of the gas line can create a tremendous pressure on the pipe and cause new leaks. It is also important to check that the low pressure pipe line is not interfering with the high pressure gas line. Wherever there are chances of any leaks, you should wrap rubber tape around it in order to seal it properly.

Tips on Hiring a Plumber: You should look for experienced plumbers- There are so many plumbers available out there. It is difficult to know who is better qualified to handle your plumbing job efficiently. To find out whether a plumber is experienced or not, you should contact him on the phone and discuss your problem with him. If he provides a generalized and vague answer, you should get alerted that he is not the right person for you. On the other hand, if a plumber gives you an honest answer, you can book his services without hesitation because he knows his job.

Save Money on Bathroom Modelling – Do your own schlepping. If you’re doing your own project, slash your materials–delivery fees by picking up goods yourself. No pickup truck? For about $400, you can purchase a nearly new single–axle utility trailer online, which you can tow behind your SUV. Get one just big enough to carry 4–by–8 sheet goods flat. Use it for a half–dozen trips, and it’s paid for itself. Find trailers for sale near you via eBay Motors, or try your local classifieds.

Save Money on Bathroom Modelling – Partner with a contractor. Though the practice is controversial among the trades, some contractors will offer consulting and mentoring services to skilled do–it–yourselfers on an hourly basis. Chicago–area builder Ted Welch charges $150 per hour for such coaching, with a two–hour minimum commitment. “The most satisfied clients tend to be those who have good manual dexterity, who realize that skills need to be practiced in order to be perfected, and who are willing to risk making a few mistakes and then learn from them,” he says.

Tips for repairing burst pipes: Switch off electricity supply to the room- The main water supply pipes are usually present in the attic or basement. When a pipe bursts, you should not only stop the water supply but also the electricity supply to that room. This precaution is necessary because you can get electrocuted by wading through the flood of water if any electric wire becomes loose or if the water comes in touch with an electric socket. Water and electricity is a fatal combination which can prove to be life-threatening. So you should be careful about it.

How to deal with water damage? Locate a leak and stop it immediately- A small leak can lead to a big crack in the pipe and cause a gushing flow of water to damage your house. If a pipe in your house breaks and floods your house with gallons of water, you need to find the source of the leak and stop the flow of water quickly. For this purpose, you need to shut of the main valve of the water supply pipe of your house. However, even after shutting off the main valve, there can be a lot of water stored in the small water pipes. To drain out this excess water, you should turn on the lowest faucet slowly. This can prevent any further water flow through the leaking pipe.

Keep an eye out for trouble. When it comes to plumbing, little leaks can lead to big problems. Be alert to signs of impending plumbing failures: Leaking faucets, damp cabinets, rocking toilets or dripping refrigerators all signal problems that need prompt attention.

If you cannot thaw your pipes, don’t force it. Instead, call a licensed plumber.

Keep a forced cup and a regular plunger handy. Each plunger has its own specific use and provides extra unclogging power.