#1 Rated 24X7 Plumbing Companies Ambler 99786 AK (844-456-4168)

Posted by in Plumbing Companies, on October 2, 2017

Plumbing Emergency Firms in Ambler Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Ambler 99786 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Ambler 99786 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Ambler 99786 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Ambler 99786 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Ambler Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Ambler 99786 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Ambler 99786 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Ambler 99786 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Ambler 99786 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Ketchikan 99901 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Meyers Chuck 99903 AK (844-456-4168)
#1 Rated 24X7 Plumbing Companies Juneau 99850 AK (844-456-4168)

Lower the thermostat on your water heater; water heaters sometimes come from the factory with high temperature settings

Prevent the bursting of pipes as a result of change in the temperature. You need to allow the flow of heat to achieve beneath the sinks and in to the pipes, you must keep your cabinet doors of your bathrooms and kitchens open. It is essential to keep water running at both cold and hot faucets together with vanities that are in close proximity to exterior walls.

Ways to Prevent Washing Machine Leaks: Check your hoses regularly- Hoses are the main sources of leaks in washing machines. The reason for this is that the force of the water flow in the hoses creates stress on the pipes and leads to small cracks with time. This is quite natural given the amount of pressure that the hose undergoes. You should check your hoses periodically to identify any leaks and get them repaired immediately if you spot any. You can check for leaks by squeezing the hose. If it feels squishy, it is an indication that there is a leak somewhere. You need to replace the pipe as soon as possible to prevent the formation of bigger cracks which can cause flooding.

Slip joint pliers can be used to loosen the collar nuts on a drain line.

Hit the Salvage Hard: Home decor blogger Anita Joyce found a large piece of salvage barn wood to serve as a shower curtain valance. It looks like a pricey piece and serves as a focal point, but it was definitely a budget item. Salvage can be intimidating, but if you start by checking out antique stores, flea markets, resellers and auctions, you’ve already got the idea, she says. You just have to go do it to really figure it out … and that’s how you score the really great items. You can also salvage and redo cast iron tubs, light fixtures, even sinks … basically anything that fits your style and you want to put the effort in to saving and making your own!

To determine the size of sump pump you need, you must know how much water you’ll need to be pumped, how high the water will be pumped and the length and size of pipe.

How to deal with water damage? Contact water remediation specialists- If your house is flooded with water because of a big leak; you need to contact a plumber to repair the leak and specialist to deal with the damage. The specialist can help you to remove all the wet and damaged contents and start the drying process. It is very important to get rid of all the moisture content from the flooring and the walls to avoid weakening of the foundation. Moisture also encourages the growth of mold. You need to make sure that all your possessions are completely dry before putting them back in their places.

What to look for in your next contractor – Find customer reviews of each company online to check the quality of the plumber and his work. Yelp is a great source of customer reviews, but it’s also a great idea to check a more reliable source like the Better Business Bureau before coming to a conclusion. Remember, no one’s perfect so a few bad reviews shouldn’t be a deal breaker. However, if the majority of the reviews are bad or the few bad ones are terrifyingly bad, keep looking.

Plunge water first before removing the trap. Before you remove a sink trap, give the drain a few plunges with a toilet plunger. This will push most of the water out of the trap, lessening the mess when you pull the trap. If you have a double sink, be sure to plug the other drain to contain the air pressure. If the strainer isn’t a screw-down style, you’ll have to hold it down while you plunge the drain.

Pump capacity charts are available through professional plumbers and installers or pump manufacturers or they can be found on the web.

Use sealant on all gaps and joints.

Ways to choose your plumber – Insurance – Plumbers should be insured. In some cases, they may also need to be bonded as well. Insurance will protect both you and the plumber in case of an injury or accident.

The most common causes of dripping faucets, are worn washers, bad internal seats or worn/faulty faucet cartridges

Keep Plumbing Where It Is: Another reason to work with a designer on your bathroom renovation: Using the existing piping will save you big bucks. Relocating utilities like the toilet and the bathtub are no small task: Designer Justin Riordan says it costs about $5,000 each time you move plumbing fixtures.

Tips for Choosing the Right Plumber – See how transparent the company is about sharing their reviews. In today’s technological world, there are many ways to find out about how a company is rated. A plumbing company that is transparent readily shares reviews on their website and also has good feedback on their social media. In addition, you can check reviews on Yelp and Angie’s List. And don’t forget to see what rating the company has with the Better Business Bureau. Another way a company shows transparency is through their affiliations.

Make sure that everyone within your household knows how to turn off the principle water supply, or understands how to contact someone that can. In the case of a burst pipe or another water-related emergency, you ought to immediately shut down this type of water to prevent flooding, structural damage, as well as a sky-high water bill.