#1 Rated 24X7 Plumbing Companies Aleknagik 99555 AK (844-507-4350)

Posted by in Plumbing Companies, on February 9, 2018

Plumbing Emergency Firms in Aleknagik Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Aleknagik 99555 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Aleknagik 99555 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Aleknagik 99555 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Aleknagik 99555 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Aleknagik Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Aleknagik 99555 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Aleknagik 99555 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Aleknagik 99555 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Aleknagik 99555 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Anchorage 99599 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Saint George Island 99591 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Holy Cross 99602 AK (844-507-4350)

Check the seal: The build up of soap can prevent a proper seal. Wipe the door seal carefully. Check to see if there are any areas where the seal is loose, torn or cracked and replace if necessary.

If you heat with electricity and live in a warm and sunny climate, consider installing a solar water heater.

Flush the Right Stuff: It can be hard to remember and even more difficult to practice, but the only things you should flush down your toilet are human waste and toilet paper. There are no real exceptions to this rule.

Tips on Hiring a Plumber: Keep an eye on the response time- Many plumbing service companies take as long as 4 days to follow up. You should choose a reputable plumbing company which gets back to you within a short time because plumbing problems are close to emergencies. Water damage can be very severe and lead to a lot of expenses if it is not resolved. Professional plumbers are more responsive and have a good understanding of all kinds of plumbing problems. You should go for their services.

Or a tiny tub. If you’ve got a small bathroom, you may think that a bathtub is not an option. But many companies are shrinking their models down to accommodate chic little spaces.

Use a strong magnet to find hidden pipes. When trying to locate a pipe under the floor, attach a rare earth (neodymium) magnet to an electrical fish tape and feed it into drain lines through the cleanout plug. Locate the magnet (and the pipe) under the floor using an ordinary compass, which will turn wildly when it finds the strong magnet.

Let There Be Lighting: Builder-grade lighting is one of the first things many people want to change in a bathroom renovation, and with good cause: The fixtures rarely hold much aesthetic appeal. Adding lots of light to a bathroom is one of the most valuable changes a homeowner can make, and it doesn’t have to break the bank. Shop sales at lighting and home improvement stores, and if your bathroom has easy roof access, consider bringing the outdoors in with a budget skylight like Solatube.

Prevention and Maintenance: Take note of possible build up of grease, hair or any material that can clog your drain. Remember that grease solidifies when it cools which could certainly occur inside your plumbing. The best that you can do is gather excess grease in a different container then dispose it when it solidifies. Though simple as they may seem, preventive measures can save you from further expenses and worries. Another option is to apply for a maintenance contract with a reputable plumbing company. If your plumbing system is regularly checked, you will surely be at peace of not having any major plumbing troubles in the future. A small amount of money spent now can save you a huge deal of money later on.

Plastic piping, unlike metal, won’t corrode.

How to deal with water damage? Facilitate the drying process- When there is water damage, it can take a long time to dry up. In order to accelerate this process, you should remove the wall board that is in touch with water. Drywall can absorb a lot of moisture, so it needs to be replaced. Opening the doors and windows and letting in air can quicken the process of drying. All wet items need to be removed, especially wet carpets. Wet-dry vacuum can help in removing the standing water. It can easily suck up the excess water and clear the surface of the flooring. Then the floor can be wiped to remove any leftover moisture content.

The Bent Wire Hanger: Simple enough, but surprisingly effective. Take a regular wire coat hanger and straighten it out as best you can. Then, bend one end over to create a small hook. Push that past the drain cover and start fishing. You should be able to get all sorts of hair and nasty stuff out of the drain. Remember, you always want to be pulling gunk out, not pushing it further. When you’ve got as much out as you can, run the hot water, and it should clear things up nicely.

A clog can often be yanked out with an easy tool like a Zip-It or other flexible-shaft pick-up tool

Septic systems should be checked twice a year, to ensure they’re running properly

A dedicated electrical circuit should be used for the sump pump. Most pumps have a high amp load when starting

If you feel like the water pressure from your shower is consistently decreasing than it may be time to clean the head. This can be done by dipping the head in a CLR solution.

Use food coloring, to test for a leaky toilet. Place a few drops in your toilets water tank. Wait a few hours, then check the bowl to see if there is any color there. If there is, it’s an indicator that you have a leaky flapper

Salt and Baking Soda: Mix 1/2 cup of table salt with 1/2 cup of baking soda and pour down the blocked drain. Leave it for 10-20 minutes, then pour boiling water down. The salt, baking soda, and boiling water will produce a chemical reaction that should dissolve some of the nastiest blockages. (See also: 27 Uses for Baking Soda)