#1 Rated 24X7 Plumbing Companies Akutan 99553 AK (844-507-4350)Posted by Lee in Plumbing Companies, on November 28, 2017
Plumbing Emergency Firms in Akutan Alaska
24X7 Operation – Get FREE Quote Click to Call
Plumbing Companies Akutan 99553 AK: Here is what you can do about your frozen water pipe
Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Akutan 99553 AK.
Pipes which are likely to get frozen
The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.
Signs of a frozen water pipe
The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Akutan 99553 AK.
When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.
Frozen pipe repair tips
Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.
Finding the root of the problem
If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.
Thawing a frozen pipe
Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.
Your presence is necessary
When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.
Using safe heat sources
You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Akutan 99553 AK.
Calling the plumber
If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Akutan 99553 AK.
How to avoid refreezing of the pipes in the future?
The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.
These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Akutan 99553 Alaska.
Plumbing Companies Akutan 99553 Alaska: General Tips!
#1 Rated 24X7 Plumbing Companies Circle 99733 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Chicken 99732 AK (844-507-4350)
Ways to choose your plumber – References – Plumbers who have been in business any length of time can and will give you references. If they cannot, or will not, then consider looking elsewhere. Talking with past customers is one of the best ways to accurately gauge the quality of the plumber’s work.
Control indoor moisture to prevent mold: The key to stopping mold and mildew is to control dampness. The worst infestations usually occur in damp crawlspaces, in attics and walls where water has leaked in from the outside, and in basements with poor foundation drainage. Stopping leaks, ensuring good ventilation in attics, keeping crawlspaces dry and routing water away from the foundation are the best defenses.
Tips for maintaining plumbing during winter: Maintain adequate temperature in your house- The attics and basements are the most vulnerable areas of the house because there is no heat source in these rooms. However, all the main pipes are located in these places. It is important to shut off all sources of cold air to these rooms. The doors and windows need to be properly sealed to prevent freezing of pipes. The thermostat should be kept at more than 55 degrees all the time so that the temperature remains warm enough for the pipes to function normally.
Prevention and Maintenance: Take note of possible build up of grease, hair or any material that can clog your drain. Remember that grease solidifies when it cools which could certainly occur inside your plumbing. The best that you can do is gather excess grease in a different container then dispose it when it solidifies. Though simple as they may seem, preventive measures can save you from further expenses and worries. Another option is to apply for a maintenance contract with a reputable plumbing company. If your plumbing system is regularly checked, you will surely be at peace of not having any major plumbing troubles in the future. A small amount of money spent now can save you a huge deal of money later on.
Shop around for vanities and fixtures. Compare prices online, in big-box stores, in specialty stores and even on Craigslist. Watch for sales and clearance items, too. You can find deals online on everything from faucets to vanities, and the online selection is much larger than what you’ll find at any store.
Insulate exterior walls to prevent frozen pipes.
Resolve Issues Early: It might seem easy enough to think that the little leak in your bathroom faucet can wait until later to get fixed. However, you will be thankful that you took care of the situation early on before it got bigger and more expensive.
Know where to go when trouble happens. Should plumbing fail, will you know how to stop the flood? Locate the main shut-off valve for the home water supply. If it’s in a dark, hidden, or hard-to-reach place, gather any tools you’ll need for a quick shut-off, and store them nearby. There’s nothing like the frustration of a missing flashlight or a misplaced shut-off key when water’s pouring down the stairs from a broken pipe.
If you cannot thaw your pipes, don’t force it. Instead, call a licensed plumber.
Sump pumps usually come with an automatic on/off switch for your convenience
If you heat with electricity and live in a warm and sunny climate, consider installing a solar water heater.
Plastic piping is much easier to install, adjust and tighten if a leak develops, than metal piping
Consider “smart” bathroom timers and humidity sensors: Bath fan timers are important because excess humidity can cause everything from window condensation and mildew to moisture and rot inside walls. Some new wall switch timers have dual controls for turning off both lights and fans after a preset time. For the ultimate in smart bath fan timers, buy a humidity-sensing fan designed to automatically turn on and off as moisture levels at the ceiling rise and fall.
Water main: You should check your lines to find out where the water main closes. For instance, if you reside in a condominium, you should check if each unit shuts off. Aside from this, you may want to check if the entire building needs to be turned off. So, this is important if you have a bad leak.
Always know where the main water shut-off valve is located in case of a leak.
Prevent Clogs: Every so often your bathroom is susceptible to clogs. Help to reduce the risk by taking the precautionary measures. Prevent soap scum build up and invest in a strainer to put around your bathroom drain. That way you can catch stray hairs and soap chips that can wreak havoc on your pipes. Additionally, ensure that you don’t put things that don’t belong in the drain, down the drain. That way you can protect your sinks and toilet.
Check your water meter when no water is being used then check it again about eight hours later. If your meter has moved, that’s a clear sign that you may have a leak
Perform a pipe inspection to check for leaks. You may have to look into some hard to see places such as under the home so make sure you use a flashlight. If you find a water leak in a pipe, you will have to get it repaired or replaced. You will have to shut off the main water valve so it can be repaired. It is wise to hire a plumber to do the job.
Look at the faucets for leaks. Examine the knobs and also the faucet itself. Hundreds of gallons water every day can be wasted because of leaks and that’s not good if you’re paying your water bill. By stopping a leak now, it can save you yourself lots of money. Leaks can grow with time as well, so avoid a disaster and view all faucets for leaks!
High-efficiency toilets are available in a wide range of models
Tips for Fixing Low Water Pressure in Your Home: Do not use all the faucets at the same time- It is the most obvious reason for low pressure of water. Generally, when all the members of the family are at home, the use of faucets increases. This usually happens in the morning and the evening. When all the faucets work at the same time, the water supply to the individual faucets decreases. In order to avoid this problem members of the family should make use of the faucets one buy one. This ensures that all the members experience a proper flow of water.
Neglecting Annual House Inspection: The smart approach, to avoid the gas leak hazards, is to get the house inspection, annually. Only the professional services should be hired for inspection. Since gas lines are usually hidden from the plain view, therefore, only a professional can detect the unobvious and deterioration signs in gas lines.
A water heater setting of 115°F provides enough hot water for most users
Use a bucket of water to flush the toilet. You don’t have to run to the neighbor’s bathroom during a plumbing project. Before you turn off the water supply, fill 2- gallon buckets with water. Flush the toilet by dumping the water in the bowl. You’ll get one flush per bucket. Works just as well as the usual method, although it won’t refill the bowl.