#1 Rated 24X7 Plumbing Companies Akiak 99552 AK (844-507-4350)

Posted by in Plumbing Companies, on December 9, 2017

Plumbing Emergency Firms in Akiak Alaska

24X7 Operation – Get FREE Quote Click to Call

Plumbing Companies Akiak 99552 AK: Here is what you can do about your frozen water pipe

Is repairing a frozen water pipe on your to-do list? Then the frozen pipe repair tips given below might prove to be helpful for you. Frozen pipes are a very big problem. They create a lot of inconvenience to people as lack of water supply disrupts the daily routine. Frozen pipes have the potential to burst which can cause a lot of damage and lead to a huge repairing expense. That is important to know if you are willing to hire Plumbing Repair Services in Akiak 99552 AK.

Pipes which are likely to get frozen

The pipes which are located on the outside walls of the house or in the basements and attics are more likely to freeze due to low exposure to heat. Places experiencing high temperatures throughout the year also have the tendency of getting frozen pipes when the temperatures suddenly drop. The water in the pipe freezes and exerts a pressure of about 2,000 pounds per square inch leading to cracks or sudden bursting of the pipes. When a pipe bursts it leads to a loss of hundreds of gallons of water amounting to a monetary damage of thousands of dollars.

Signs of a frozen water pipe

The most obvious sign of a frozen water pipe is when there is no water supply from that pipe despite the faucet being on. Frozen pipes usually have frost on them which is a clear indication of water being frozen inside the pipe. Another obvious sign is the low temperature outside. Only when the temperature falls to thirty two degrees Fahrenheit or below, does the water start freezing. This is the time when people need to start taking precautions to avoid the freezing of pipes. Do not forget this tip if you would like to look for Plumbing and Heating Contractors Akiak 99552 AK.

When pipes are frozen, they develop a noticeable bulge. Icicles formed on the pipes are due to the leakage of water from a crack in the pipe which is a sign of a frozen or damaged pipe. Sometimes, the whole pipe might not be frozen. To detect frozen spots in the pipe, you can use an infrared thermometer. When you move the thermometer along the pipe, the frozen spots show a much lower temperature than the other parts of the pipe.

Plumbing Companies Akiak 99552 AK

Frozen pipe repair tips

Despite taking all kinds of precautions, if your pipes get frozen, then you can follow some of the frozen pipe repair tips mentioned below to solve the problem.

Finding the root of the problem

If one of the faucets stops working, it is very likely that the other fixtures too have become blocked. The reason for this is that all the small pipes are connected to the main pipe. Only when there is a problem in the main pipe do the other small pipes get affected. So you need to locate the frozen spot in the main pipe. If the pipes of only one part of the house are blocked, then it is an indication that one of the branch pipes providing water supply to that part of the house is frozen.

Thawing a frozen pipe

Once you locate the root of the problem, you can start the process of thawing. You need to apply heat to the frozen area and wait for the ice to melt inside the pipe. However, before applying heat, you should always shut off the faucets and fixtures first. When the ice melts, you can turn on the faucets slowly for the melted water to drain and you can assess the damage caused due to freezing. The faucets should be kept on to avoid refreezing. The pressure of the blockage can cause cracks in the pipe which can be detected as the water supply begins and the pipe starts leaking in certain places. Thawing is essential to prevent the pipe from bursting. Cracks can be repaired but if the whole pipe bursts, there is no option other than installing a new pipe.

Your presence is necessary

Plumbing Companies Akiak Alaska

When the process of thawing is going on, you should always stay close. The reason is that the heaters or hot water used to increase the temperature cannot be left unattended or they can cause more damage instead of helping you. Also, water damage due to a leak can be avoided if you are present on scene. The process of thawing is slow and patient work. So it is better to pay attention to it rather than spending more later in case the pipe bursts or your property gets damaged.

Using safe heat sources

You should avoid using open flame or a blowtorch as it can present a fire hazard. It can also lead to a rapid melting of the water which can exert pressure on the pipe and make it burst. Some safe heat sources are electric heating pads, high power hair dryers, infrared or incandescent heat lamps, portable heaters and electric pipe heating tape. That is really important when it comes to looking online for the top Plumbing Emergency Firms Akiak 99552 AK.

Calling the plumber

If you are unable to detect the frozen spot or if the frozen spot is located underground or behind a wall, it is time to call the plumber before the pipe bursts. The plumber can expertly detect the problem and with minimum damage to your property can thaw the pipe. However, you need to be careful about how to choose your contractor. Call us today and we will help you find the best Plumbing Contractors Akiak 99552 AK.

How to avoid refreezing of the pipes in the future?

The first thing that you need to do is to locate all the areas in your home which are susceptible to freezing. The area near the water lines should be kept warm. This can be done by insulating the walls, repairing broken windows and wrapping the pipes with foam insulating sleeves. There are some pipes which are more vulnerable to freezing than others. To prevent them from freezing, the faucets should be kept on so that a small trickle of water constantly flows. The loss of this water is bearable compared to the cost of repairing a damaged pipe. Outdoor pipes should be buried below the frost line and a twelve inch thick insulation should be provided to these underground pipes.

These are just a few frozen pipe repair tips which you can try out to get effective results. That is really important when it comes to choosing the best and top rated Plumbing Companies Akiak 99552 Alaska.

References

• https://www.thespruce.com/how-to-thaw-frozen-pipes-2718682

• https://www.thespruce.com/preventing-and-thawing-frozen-water-pipe-1824905

• https://www.hunker.com/12267961/how-to-find-frozen-spot-in-water-line

Plumbing Companies Akiak 99552 Alaska: General Tips!

Related Links:

#1 Rated 24X7 Plumbing Companies Gambell 99742 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Healy 99743 AK (844-507-4350)
#1 Rated 24X7 Plumbing Companies Anderson 99744 AK (844-507-4350)

A float switch is the most common sump pump automatic switches.

Staying in building during a major gas leak: The peculiar odor of gas is an obvious indication of a major gas leak in the house or the building. It is crucial that you leave the place/building immediately without causing a delay in figuring out the reason for smell. It’s time you should immediately call for the professional assistance of gas line repair in Mansfield, TX. Meanwhile, the best you can do is to cut off the supply, through an emergency switch or gas meter.

Invest in a Water Softener: All the minerals in hard water make your drinking water taste gross, but it is also detrimental to your plumbing system. Over time, your pipes will develop heavy mineral deposits. Invest in a water softener to protect your pipes and also improve the quality of your water.

Monitor your water bill: Sometimes, the only way you know that water is leaking is taking a closer look at your water bill. If your usage jumps significantly from one month to the next without explanation, put your “water detective hat” on. Is there a leak in your crawlspace? Or, is it a pipe in your front yard? Don’t leave mystery leaks unattended!

Install water detection devices: A water detector is a small electronic device that sounds an alarm when its sensor comes in contact with moisture. Its main benefit is that it detects low moisture levels or slow leaks that often go unnoticed. Install it near water heaters, sump pumps, washing machines, dishwashers and toilets to prevent extensive damage and mold growth.

Examine your faucets for leaks. Look into the knobs as well as the faucet itself. Numerous gallons of water each day can be wasted due to leaks and that’s not good if you’re paying your water bill. By stopping a leak now, you can save yourself lots of money. Leaks can grow with time too, so avoid a disaster and look all faucets for leaks!

Use a strong magnet to find hidden pipes. When trying to locate a pipe under the floor, attach a rare earth (neodymium) magnet to an electrical fish tape and feed it into drain lines through the cleanout plug. Locate the magnet (and the pipe) under the floor using an ordinary compass, which will turn wildly when it finds the strong magnet.

Repair broken and cracked windows and doors to prevent frozen pipes.

Tips to Hire a Local Contractor: Read Online Reviews. If a plumbing company has a great track record, it will definitely be reflected online. Check online resources like Yelp to make sure that other people have had good experiences with the company that you’re looking to hire. Reviews are a great way of knowing whether or not the workmanship that that plumbing company provides is exceptional.

Tips for Choosing the Right Plumber – Timeliness and cleanliness are indicators of professionalism. Your time and your home are important. You should expect the company to treat you with respect by keeping you notified with a time range for when their technician will arrive and the technician should arrive at the time you were told. You should also expect a technician to take all necessary precautions to protect your home. An example of this is wearing shoe covers. A good indicator of cleanliness is the clean, professional appearance of the technician and his tools when he arrives at your home. There is a saying that you can often tell the quality of the work by the tools.

No need to monitor the ongoing work: Supervising the work in progress is a smart choice. Never neglect the ongoing work and workmanship. A plumber is always more cautious in delivering quality service if the work is being monitored by the owner throughout the process of gas line repair in Mansfield, TX. This will also help in learning some new technicalities and basics which you would miss otherwise.

Tips for installing and repairing a gas line: Always test the pipe before using it- Whenever you carry out a repair or replacement work on your gas lines, you should check the pipe for leaks before starting regular use of the gas line. For this purpose, you need to switch on the gas burner for some time and see whether gas is leaking or not. If there is a leak, you can get a distinct smell and hear a hissing sound coming from the pipe line. You need to turn off the gas immediately and seal the leaks. You should repeat this checking process till you are completely satisfied that there are no leaks.

Bathroom Design Tips – Curbless Shower with a Bench and Grab Bars – This doesn’t have to look as antiseptic as it sounds. Think in terms of a tiled shower area with recessed shelves at arm’s level to stop you from having to stoop down to the floor or reach up to a shower rack. Add a matching ceramic bench and grab bars that come in brushed nickel, chrome or bronze to match your faucet hardware. They will look more upscale than the white plastic hospital variety.

Using biodegradable soaps will help you conserve more water

Check appliances regularly: Check and maintain your home appliances regularly for leaks, according to manufacturer’s directions.

If a pipe freezes shut off the water from the main valve. Than run the water from the faucet nearest to the frozen pipe so it may thaw.